Busch-Jaeger Busch-SmartTouch ST/A10.11-811, Руководство по эксплуатации продукта

Страница: 65 / 364

Commissioning via Busch-free@home®
Product manual 2CKA001473B5342 │ 65
Actuators/group selection
1. Select a room in the bar at the right edge of the screen.
– The actuators and groups contained in the selected room are displayed in the list view.
The sequence is portrayed in the following by means of a room temperature controller.
Fig. 36: Actuator/group selection
2. Select the room temperature controller by tapping on the points on the right side and pull the
control element of the room temperature controller into the working area on the surface of
the panel.
Fig. 37: Control element view
3. Continue in this way and position the desired functions on the monitor of the panel.
– Additional buttons are always positioned under the previous button.
4. Confirm the adjustments with a click on the "Update panel" button.
– The new configuration is sent to the panel. Then the new buttons are visible on the
panel and can be used.
Notice
18 configurable control elements can be displayed on a screen page.