32
of 148
This menu is used to test the PLC interface. The input levels are indicated, and the output levels can be set
and reset here.
This menu is invoked with the [F3] key (PLC) from the access menu.
The signals are present at the 37- pole SUB-MIN-D socket.
The inputs and outputs need to be connected and supplied from an external source. Pulse diagrams and pin
assignments are provided in the chapter on the PLC interface on page 71.
The 16 outputs are allocated to pins 1 to 17.
Output sequence:
S0, S1, S2, S3, S4
MEAS-RUN,
MEAS-END,
MEAS-ERR
EV1,
EV2,
EV3,
EV4,
EV5
OUT-AUX1,
OUT-AUX2,
OUT-AUX3
The 15 inputs are allocated to pins 21 to 35.
Input
sequence:
MEAS-1/0, COMP-1/0, DATA-1/0, EXT-1/0, DRU-1/0
LATCH, IN-AUX1, IN-AUX2, IN-AUX3, IN-AUX4,
SET0, SET1, SET2, SET3, SET4
Description and pin assignment chapter Block digram page 18.
[F3] key (HOME):
This effects a return to the main menu.
[F4] key (RETUrn):
This effects a return to the access menu.
The [
→
] and [
←
] cursor keys are used to select the individual output pins.
The selected pin is displayed inversely.
[F1] key (SET):
The selected output pin is set to 1.
[F2] key (RES):
The selected output pin is reset to 0.
