33
of 148
5.4. Function keys while a measurement is stopped
5.4.1 Datalogger evaluation menu
5.4.1.1 Display of the individual measurement values
The values stored in the datalogger can be viewed individually in this menu.
The following entries are possible:
[F4] key (RETUrn):
This effects a return to the main menu.
[F3] key (CONF):
This invokes the datalogger setting menu.
[F2] key (STAT):
This invokes the datalogger evaluation menu.
The [
↑
] and [
↓
] cursor keys are used to select the required parameter. The selected parameter is displayed
inversely. Only the selected parameter can be changed.
The [POS1] key is used to select the 1st parameter in a window.
The [END] key is used to select the last parameter in a window.
Specifying the
MEAS
urement
NUMBER
:
The [
→
] and [
←
] cursor keys are used to increment and decrement the measurement value number.
Pressing the [F 1] key (INPUT) invokes the input mode.
Numeric keys [0] to [9] are used to enter a measurement-value number between 1 and 20000.
The [BSP] key is used to delete the character entered last.
The [C] key is used to delete all the entered characters and repeat the input procedure from the beginning,
without exiting the input mode.
The [ESC] key is used to cancel the current entry, and exit the input mode.
The [ENT] key is used to save the input value - provided that it is valid - and exit the input mode.
Specifying the
Block
number:
The [
→
] and [
←
] cursor keys are used to increment and decrement the block number.
Pressing the [F1] key (INPUT) invokes the input mode.
Numeric keys [0] to [9] are used to enter a block number ranging between 0 and 31.
The [BSP] key is used to delete the character entered last.
BLOCK: 12 DATALOG.: 12
MEAS.
NUMBER: 15
MEAS. VAL.:
123.45 mOHM
SIZE:
625 (18)
DATE: 01.08.18
TIME: 13:12:15.34
INPUT STAT CONF RETU
Display of the
datalogger evaluation menu
(display of the individual
measurement values)
