Bullhorn SDT16 Family, Руководство по установке и настройке, Страница: 91 / 110

SDT16 Family Installation and Configuration Guide
Chapter 3. Configuration 81
•
Coil Status: zero (0) offset value
•
Input Status: 10,000 offset value
•
Input Register: 30,000 offset value
•
Holding Register: 40,000 offset value
7.
If you are working with an odd-numbered
Channel
window and you want to map a 12-digit
register, click the
Double Register
check box.
8.
Click
Save + Next Register
to save settings and display the next
Channel Number
configuration window. If you do not want to configure another channel, click
Save
to save
settings and close the configuration window.
9.
When you finish configuring all channels, continue with Save Configuration Settings in the Event
Log on page 88.
N
OTE
:
If you need to unmap a register, refer to Unmap a Register on page 87.
Map Registers for a Reynolds 16 or 32-Bit Input Device
Complete the following steps to map registers for a Reynolds 16 or 32-bit imput device:
1.
On the main configuration window, click the channel number you want to configure. For
example, click
Channel 1
(Figure 3-23). You can also display a channel configuration
window by clicking
Tools
>
Settings
>
Channels
. When the window displays, click
Next
Register
to display the channel number you want to configure.
N
OTE
:
If you are mapping a 12-digit register, make sure to choose an odd-numbered
channel on the main configuration window. For more information, refer to Configure
Channels on page 78.
Figure 3-23. Reynolds Register Configuration