Bullhorn SDT16 Family, Руководство по установке и настройке, Страница: 84 / 110

SDT16 Family Installation and Configuration Guide
74 Chapter 3. Configuration
3.
If you do not want to set the controller clock with the same time as your PC, set the time in
the
Controller time
field by using the up and down arrows.
4.
Click
Save
when you finish.
Configure the Controller Clock (SAT)
You can use one of the following three features to set the controller clock for the SDT16-SAT:

Set to PC Time
: Match your PC time.

UTC Offset (h)
: Match a time zone by adding or subtracting hours from the Coordinated
Universal Time (UTC), which is the same as Greenwich Mean Time.

Controller time
: Set the time manually.
Complete the following steps for the SDT16-SAT:
1.
Click
Change
in the group box on the main configuration screen to display the Controller
Clock configuration screen.
You can also display the Controller Clock screen either by clicking
Tools
>
Unit Settings
>
Controller Clock
or pressing
F5
.
Figure 3-18. Controller Clock for SAT
2.
To match your PC time, click the
Set to PC Time
check box and then click
Save
.
A check mark inside the check box indicates the setting is enabled. To disable the setting,
remove the check mark by clicking the check box again.
3.
To match a time zone, click the up or down arrow in the
UTC Offset (h)
field and then click
Save.
N
OTE
:
You can find out how many hours to add or subtract for a time zone by visiting a
website like http://wwp.greenwichmeantime.com/.
4.
To set the time manually:
a.
Select the time field you want to change in the
Controller time
text box.
b.
Click the up or down arrow to move the time forward or backward.
c.
Repeat step
a
and
b
for each time field you want to change in the
Controller time
text
box. Click
Save
when you finish.