Bullhorn SDT16 Family, Руководство по установке и настройке, Страница: 68 / 110

SDT16 Family Installation and Configuration Guide
58 Chapter 3. Configuration
Figure 3-3. Communications Settings
Descriptions of the
Communication Settings
group box fields:

Report Destination and Report Origin:
Apply only to digital cellular units - GSM. Numbers
are assigned to the unit by the digital cellular network. Technical Support typically refers to
these numbers when troubleshooting a communications problem.

International Gateway:
Applies only to units that use a satellite communication network -
ORBCOMM or SkyWave. The information identifies the current Gateway Control Center
(GCC) setting on the International Gateway configuration window. The ORBCOMM
example shows the default setting
Americas (N S)
. The SkyWave example shows
Altanlic
Ocean West
. For more information, refer to Configure Communication Settings (International
Gateway) on page 70.

Test Packet/Transmit:
Sends a test packet to your Bullhorn website account for
communications testing. Status messages display in the window next to the Transmit
button, which identify the transmission status (
No test packet sent
,
Test Packet Status
,
Preparing...
,
Sending test packet..
, or
Acknowledgement
) received from server. Refer to
Transmit a Test Packet on page 88.

Transmit Retries:
For digital cellular units (GSM) or satellite units that uses the SkyWave-
Inmarsat communication network (SAT), this field always displays the abbreviation
n/a
(not
applicable/not available). When working with satellite units that use the ORBCOMM
communication network (ORB), this field may display either
n/a
or a value.
Digital cellular units (SDT16-GSM) and satellite units that use the ORBCOMM
communication network (SDT16-ORB) are designed with a retry loop, which determines
how often these units resend a scheduled data packet or alarm packet when an