Bullhorn SDT16 Family, Руководство по установке и настройке, Страница: 80 / 110

SDT16 Family Installation and Configuration Guide
70 Chapter 3. Configuration
Complete the following steps:
1.
Click the
Bullhorn
icon on your desktop to start the UCT software.
2.
Choose a Bullhorn unit to work with when the
Find Devices
window displays.
3.
When the main configuration window displays, click
Tools
>
Options
on the main menu.
4.
Click
Folder for Log files
when the
Options
window displays.
5.
When the Browse for folder window displays, navigate to the folder you want to store
templates and log files. Or, click
Make New folder
to create a new folder.
6.
After choosing or creating a new folder, click
Ok
to close the
Browse for folder
window.
7.
When the Options window displays, click
Done
to close the window and return to the main
configuration window.
Configure Communication Settings (International Gateway)
The following procedure applies only to the SDT16-ORB and SDT16-SAT units.
The selection you make determines which Gateway Control Center (GCC) the Bullhorn unit uses
when transmitting data to your website account. Choose the gateway that is closest to the
installation area. Data transmissions will not transmit successfully when an incorrect gateway is
selected. If you do not know which gateway to select, please contact Technical Support for
assistance.
N
OTE
:
For more information about ORBCOMM gateways, visit the ORBCOMM website at
http://www.orbcomm.com. For more information about SkyWave gateways, visit their website at
http://www.skywave.com.
Complete the following steps:
1.
Click
Change
in the
Communications Settings
group box on the main configuration
window.
2.
When the
International Gateway
window appears (Figure 3-13 for ORB or Figure 3-14 for
SAT), select an option from the list. Click
Accept
when you finish.