Buderus Logamax GB062-24 KDE H V2, Руководство по обслуживанию

Страница: 14 / 57

3
Service menu settings
Logamax Plus GB062 14
3.2.3 Menu 3
To call up a service function in this menu:
B
Hold down “Back”, + and – at the same time until L.1 is
shown on the display.
B Press – until L.3 is shown on the display.
B
Press OK to make settings in menu 3.
B
Press + or – to scroll through the menu's service
functions.
Code List for the Service function E.1 :
Service function Possible settings/comments/displays
E.1 Appliance type, output, DHW heat-
ing (soft code)
This service function allows you to adjust the control unit to the appliance
output and the type of DHW heating (see table below regarding the code list
for this service function). This is only necessary when the control unit is
replaced.
F.1 Gas Type With this service functlon is changed the gas type.
B
To change the actual gas type, press + and - button together until the
scroll up/down symbol is shon in display.
• 0 : Naturalgas
• 1 : Liquidgas (LPG)
Tab. 5 Menu 3
Country Definition of Appliance
Soft
Code
TR (Turkey) GB062-22 KD ... 21
IT (Italy) GB062-24 (K) ..... 22
GB062-24 KD ... 23
GB062-14 ... 24
AT (Austria) GB062-24 (K) ... 22
PL (Poland) GB062-24 (K) ... 27
GB062-14 ... 29
RO (Romania) GB062-24 .... 27
GB062-24 KD .... 28
GR (Greece) GB062-24 .... 27
GB062-24 KD ... 28
SK (Slovakai) GB062-24 (K) .... 27
GB062-14 .... 29
CZ (Czech
Repuclic)
GB062-24 (K) .... 27
GB062-14 .... 29
BE (Belgium) GB062-24 KDE .... 28
GB062-24 KD ... 26
GB062-14 .... 30
GB062-24 .... 25
Tab. 6 Code table for the service function E.1
This parameter is only available/active for the
spare part change. By origin PCB (electronic
card) this function is only visible.
This parameter should be adjusted by each
PCB-Change regarding the TTNr. (Codelist is in
PCB included).