Bruker BMPC/2, Техническое руководство

Страница: 70 / 136

70 Z31823_00_05
Troubleshooting
11.1.1 Description of Error Messages
The following section contains a description of some of the common error messages that
might be displayed, as well as a solution to the problem.
11.1.1.1 Limit Data P1 failed
It was not possible to read the limit data for the pressure P1 from the EEProm, thus
supervision of the Pressure P1 is not possible.
Solution:
Using the function „Read from Backup Database“ from the menu
Tools -
Options - Limit Values (see
"Limit Values" on page 100 ) you are able to read the limit val-
ues stored on the PC’s hard disk.
To solve this problem you will need to reload the values from the backup database to the
BMPC/2 Control Unit using the „Write Values“ function.
11.1.1.2 Limit Data T1 Failed
It was not possible to read the limit data for the temperature T1 from the EEProm, thus
supervision of the temperature T1 is not possible.
Solution
: Reload the values from the backup database to the BMPC/2 as shown for
Limit Data P1 fail.
11.1.1.3 Limit Data T2 Failed
It was not possible to read the limit data for the temperature T2 from the EEProm, thus
supervision of the temperature T2 is not possible.
Solution
: Reload the values from the backup database to the BMPC/2 as shown for
Limit Data P1 fail.
11.1.1.4 Limit Data T5 Failed
It was not possible to read the limit data for the temperature T5 from the EEProm, thus
supervision of the temperature T5 is not possible.
Solution
: Reload the values from the backup database to the BMPC/2 as shown for
Limit Data P1 fail.
11.1.1.5 Limit Data Flow Failed
It was not possible to read the limit data for the helium flow Fl from the EEProm, thus
supervision of the helium flow Fl is not possible.
Solution
: Reload the values from the backup database to the BMPC/2 as shown for
Limit Data P1 fail.