Bruker BMPC/2, Техническое руководство

Страница: 101 / 136

101 Z31823_00_05
Configuration (administrator)
• Read from Backup Database: With this button you can read the values backwards
from the backup database. This is useful if you want to reuse a former configuration.
• Write Values: Pressing this button will write the current field values to the unit.
Warning: This will overwrite the current values saved in the control unit mem-
ory.
Write to Backup Database: When you press this button you can save the current field
values in the database of the BMPC/2 control program.
i
Changes to the limit values will first take effect when you press the Write Values button.
Once you are certain that the values are suitable you can add them later to the backup
database by pressing the Write to Backup Database button.
12.3.2.2 Heater & APD Settings
In this settings window you can adjust the settings for the magnet heater.
Figure 12.15Tools - Options - Heater & APD Setting
These values are normally entered during the installation and in most cases do not need
to be modified.
•
Heater Mode: It is possible to operate in automatic or manual heater mode. As
default Automatic mode is selected. In automatic mode, internal regulation ensures
that the P2 pressure remains constant in the magnet dewar, based on the values
entered. In manual mode (Automatic must be deselected) the unit will be heated
using a constant heater power.