Bruker BMPC/2, Техническое руководство

Страница: 11 / 136

11 Z31823_00_05
2 Introduction
The Bruker Magnet Pump Control 2 (BMPC/2) is a Windows XP based system that
supervises and serves the pumps and valves that are needed for the stable operation of
sub-cooled Bruker high field magnets.
The main functions include:
•
Monitoring of the magnet status and the most important cryogen parameters.
• Monitoring and control of the pump system.
• Alarm system.
2.1 Modes of Operation
The BMPC/2 can be operated in two different modes, manual or automatic. The modes
of operation are discussed in detail in the chapter "Principles of Operation" on page 15 .
2.2 User Interface
The BMPC/2 is controlled by a
software user interface
. This interface contains three
user levels:
1.
User
- Standard User Level
2.
Administrator
- System Administration and Configuration Level
3.
Service
- For Bruker Service
There are five different screen display modes and four different work display modes
available within the user interface. These various software interface displays can be con-
figured individually by the system Administrator or by Bruker Service. Refer to the chap-
ter "Software" on page 21 for an overview of the user interface.
2.3 Parameter and System Configuration Overview
The BMPC/2 system is pre-configured by Bruker service personnel during installation.
The configuration parameters for the alarm and voice box systems can be adjusted by
the system Administrator or by Bruker Service. Information for the Administrator on how
to configure the system is available in the chapter "Configuration (administrator)" on
page 87 .