Bruker BMPC/2, Техническое руководство

Страница: 27 / 136

27 Z31823_00_05
Software
•
Filtered display
: If you want to view the data within a certain timeframe, you can do
so by entering a beginning and ending date.
The adjustments that have been made will automatically be used for all the other graphs
when you click on the „Use these parameters for all graphs“ button. Subsequently they
will all use the same time axis.
The adjustment of the Y-axis can take place automatically or manually.
Figure 5.7 Graphical Display - Configuration Y-axis
•
Automatic:
When the checkbox Automatic is selected, the range of values is com-
puted automatically based on the maximum and minimum values that have to be
displayed. You can either select both, the maximum and the minimum to be com-
puted automatically or just the maximum or just the minimum
•
Manual:
When the Automatic checkbox is not selected, you can manually select the
values by pressing the corresponding Set button and entering the values in the dia-
log window that appears.
The manual mode is useful when a value does not change over the entire given period
and thereby the display of the upper and lower margins will always appear in the field of
view.
5.3.2.2 Zoom Function
To improve the resolution, you can use the zoom function to enlarge parts of the graphi-
cal data.
To zoom
in
press the left mouse button and select an area moving the mouse from the
upper left
corner of the
lower right
corner.
To zoom
out
press the left mouse button and select an area moving the mouse from the
lower right
to the
upper left
corner.
Automatic Y-Axis Configuration
Manual Y-Axis Configuration