Brother PD-3000, Инструкция по эксплуатации

Страница: 62 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
54 PD-3000
Moving the escape point
The following describes how to move the escape point from A to B.
* The escape point is a provisional point provided to preventing the work clamp from interfering with the needle or the presser foot
when the work clamp is lifted at the start point.
1. Carry out step 1 of "Procedure for modifying
program".
2. Select with , and then press
.
3. Press , and then press .
The work clamp moves to the escape point.
4. Press .
5. Select with , and then press
.
6. Select with and press .
7. Move the work clamp with .
Press when the needle point is at point B
of the pattern sheet.
B is programmed.
8. Press twice.
9. Select with , and then press
.
10. Press , and then press .
The work clamp moves to the sewing start point.
11. Press .
12. Select with , and then press
.
13. Select with , and then press
.