Brother PD-3000, Инструкция по эксплуатации

Страница: 135 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
PD-3000 127
„
Modifying the program of a multiple stitch
When modifying the stitch length or the number of lines for a multiple stitch, the previously created curve program can
be used.
The previously created programs are required for modifying programs of multiple stitch.
Programs of multiple stitch written to a media cannot be modified.
Commands to be used
Input the number of lines for a multiple stitch in . The specifiable number of lines is
2 to 99.
Example: Number of line for a multiple stitch Input value
5 lines 505
Input the stitch length in .
1. Press .
The work clamp moves to the home position.
2. Input .
The needle point moves. When the needle point is
at the start point for a multiple stitch, stop it by
pressing
.
3. Input the desired number of lines as
.
4. Input the desired stitch length as
.
5. Press .
Calculation is performed based on the input data.
When the calculation ends, the needle point moves
to the end point for a multiple stitch.