Brother PD-3000, Инструкция по эксплуатации

Страница: 65 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
PD-3000 57
6. Select with , and then press
.
7. Move the work clamp with so that
the needle point is at B of the pattern sheet.
Record the coordinates (values of X and Y ).
Do not press
.
8. Press three times.
The needle point returns to the home position.
9. Select with , and then press
.
10. Press , and then press .
The work clamp moves to point C.
11. Press .
12. Select with , and then press
.
13. Select with , and then press
.
14. Move the work clamp with an
equivalent of the coordinate value recorded in
step 6.
15. Turn the pulley with a hand and put a marking
with the needle to indicate the position of point
D.
16. Turn the pulley with a hand and move the
needle to the top point.
17. Press three times.
18. Select with , and then press
.
19. Select with , and then press
.
20. Move the work clamp with .
Press when the needle point is at point D
of the pattern.
21. Press .
22. Carry out steps 3 to 5 of "Procedure for
modifying program".