Brother PD-3000, Инструкция по эксплуатации

Страница: 83 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
PD-3000 75
1. Adjust the needle position with to the
first point of a part for which low-speed sewing
is set.
2. Select , and then press .
3. Select an option of low-speed sewing with
.
4. Press .
5. Press .
6. Adjust the needle position with to a
point at which setting of low-speed sewing is
canceled.
7. Press .
8. Select a low-speed sewing code as in step 2, and
then press .
9. Select Low-speed 0 with .
10. Press .
Creating split data
Specify breakpoints for sewing a series of different patterns.
For details, refer to "Programming different patterns by splitting each in sequence" (page 39).
1. Select , and then press .
2. Use to specify whether to stop the
needle at the lower end or not, and then press
.
Basting
Basting can be input.
1. Select , and then press .
2. Use to select ON/OFF, and then press
.
ON: The needle stops at the lower end.
Thread breakage is not carried out.
OFF: The needle stops at the upper end.
Thread breakage is carried out.