Brother PD-3000, Инструкция по эксплуатации

Страница: 125 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
PD-3000 117
Moving the pattern in parallel (when the first stitch is the escape point)
The following describes how to move the pattern in parallel when the first stitch is the escape point.
1. Carry out step 1 of "Procedure for modifying
program" to call program.
2. Press , and then press .
The work clamp moves to point A.
3. Move the work clamp with so that
the needle point is at B of the pattern sheet.
Record the coordinates (values of and ).
If the moving distance is long, press before
moving the work clmap.
4. Press .
The needle point returns to the home position.
5. Press , and then press .
The needle point moves to C.
6. Move the work clamp with an
equivalent of the coordinate value recorded in
step 3.
The moved point is now D.
If the moving distance is long, press
before
moving the work clamp.
7. Turn the pulley with a hand and put a marking
with the needle to indicate the position of point
D.
8. Turn the pulley with a hand and move the
needle to the top point.
9. Press .
The work clamp returns to the home position.
10. Move the work clamp with .
Press when the needle point is at point D
of the pattern.
11. Carry out steps 3 and 4 of "Procedure for
modifying program" to save program.