Brother PD-3000, Инструкция по эксплуатации

Страница: 131 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
PD-3000 123
„
Creating a circle (zigzag circle) by specifying the radius
1. Input (clockwise) or
(counterclockwise).
2. Input the stitch length in 3 digits, and then press
.
Creating a zigzag circle (skip to step 5 when not
creating a zigzag circle)
3. Input (width).
4. Input the zigzag stitch length in 3 digits, and
then press .
5. Move the needle with to select the
second point. Press .
Creating an arc
Command to be used
Creating an arc passing 3 points
1. Select the sewing start point with ,
and then press .
2. Input .
3. Input the stitch length in 3 digits, and then press
.
4. Move the needle with to select the
second point. Press .
5. Move the needle with to select the
third point. Press .