Brother PD-3000, Инструкция по эксплуатации

Страница: 68 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
60 PD-3000
Moving a part of a continuous program in parallel partially
Move a part of a continuous program in parallel to the position before the next feed is started. The following describes
how to move only pattern B in parallel.
1. Select with , and then press
.
2. Press and move to position 2.
The work clamp moves from the start point by each
stitch.
3. Press .
4. Select with , and then press
.
5. Select with , and then press
.
6. Move the work clamp with .
Press when the needle point is at 2.
7. Press three times.
When the movement in parallel is carried out in the
midst of the stitch data (6 between 2 and 3 in an
example below), the movement in parallel reaches
the start point of the next feed (position 3):
The movement in parallel reaches the start point of
the next feed (position 3).
If the moving distance in parallel is 12.7 mm or less,
the movement in parallel carried out in the stitch
data and if the distance is more than 12.7 mm, the
movement in parallel is done in the feed data.
Pattern A Pattern B Pattern C
2”
1
5
Start point 2
3
4
3”
Feed
Feed
5
Pattern A Pattern B Pattern C
3”
Feed
Start point
1
2
3
4
6”
6
Feed