Brother GTX-4, Руководство по обслуживанию

Страница: 145 / 500

4-48
Improvement of print quality
(11) After cleaning the surrounding areas of wiper and nozzle surface, is such failure cleared?
Clean the surrounding areas of wiper and nozzle surface.
Clean the wiper.
(1) Use clean stick R to wipe clean the surface of the wiper as well as the gap between the convex part and the wiper.
<IMPORTANT>

Never touch the tip end of clean stick R with your hand. If any sebaceous matter is attached to the wiper, it may result in a
printer malfunction.

The clean stick R used for cleaning the nozzle guard should be rinsed in the cleaning cup before the next use. Be sure to
use the clean stick R separately for color ink and white ink.
(2) Use the clean side of clean stick R to wipe clean the back of the wiper.
X0195
(3) Rinse the clean stick R in the cleaning cup to use it for cleaning of the exhaust cap to be performed next.
<IMPORTANT>

Be sure to use the clean stick R separately for white ink and color ink.
(4) Print out a nozzle check pattern to check the result.

If non-ink ejection nozzle is not found -> OK

If the state of non-ink ejection nozzle is not changed -> NG
=> "(12) After replacing the wiper cleaner, is such failure cleared?"
Wiper
Clean stick R
Front
Back
Front
Wiper
Clean stick R
Convex part