Brother GTX-4, Руководство по обслуживанию

Страница: 21 / 500

1-7
Before Using Your Printer for the First Time
1-3. Other items you must make available for use
What you buy from our distributors
<TIPS>

For details of the optional items, refer to "10-4. About consumable supplies, optional items and replacement parts".

Ink pouch

Maintenance solution pouch

Cleaning solution

Pretreatment

Wiper cleaner
Others

USB cable
USB 2.0-compliant device cable (A/B)
<NOTE>

Using other cables than the specified one may cause the printer to be rendered inoperative. Do not use any extension
cable.

LAN cable
LAN cable (10BASE-T/100BASE-TX)

USB flash
Please use a FAT32-formatted USB flash of which storage capacity is 2 GB to 32 GB in total. You cannot
use a USB flash with security functions such as password lock function.

Pure water
It refers to such water as distilled water and purified water, which is used to dilute the pretreatment with it.
<NOTE>

Avoid using such water as tap water in which impurities are contained.

Heat press
It must deliver the performance through which the print range of the size of a platen to be used can be
covered and 180°C (356°F) can be kept for 35 seconds or more. At a fixing stage of the pretreatment, be
sure to use the heat press, but not an oven, to smoothen the surface.

Peel-off sheet
Always use this sheet to flatten the fixed surface and enhance the peel property when fixating the
pretreatment and ink by means of the heat press. For details, refer to "6-3-1. Provisions for pretreatment" of
the Instruction Manual.

Silicon foam (of open-cell structure)
It is the foamed mattress which resists heat. Use this at a fixing stage through the use of the heat press.

Adhesive roller
Use these to remove lint from a T-shirt or debris from its surface.