Brother GTX-4, Руководство по обслуживанию

Страница: 54 / 500

2-6
Installation and preparation
2-3-2. Turning off the power
You can turn off the power in two ways; normal mode and emergency mode, depending on how you press the power
button.

Normal mode
The power is turned off after cleaning is performed at the end of a print job to keep the print heads in good
conditions.

Emergency mode
If you press and hold the button for 3 seconds or more, the power is turned off in emergency mode. In
emergency mode, the power is turned off without cleaning performed at the end of a print job to keep the print
heads in good conditions.
Turning off the power in normal mode
In the following cases, the power should be turned off in normal mode.

When the front cover needs to be opened for maintenance of the printer, etc.

When moving the printer elsewhere.

In the event that the power supply interruption is anticipated in advance, including the case where a planned
power outage is scheduled.
(1) Press the power button.
After the shutting down cleaning cycle is performed, the power will be turned off.
<IMPORTANT>

Do not press and hold the power button for 3 seconds or more. If you press and hold the button for 3 seconds or more, the
power is turned off urgently, and no cleaning will be performed at the end of a print job to keep the print heads in good
conditions.
Turning off the power in emergency mode
(1) Press and hold the power button for about 3 seconds.
Then the power will be turned off.
<IMPORTANT>

Note that no cleaning will be performed at the end of a print job to keep the print heads in good conditions. For this reason,
be sure to activate the printer once again and perform the head cleaning after activation.