Brother GTX-4, Руководство по обслуживанию

Страница: 307 / 500

6-116
Disassembly / Replacement / Adjustment
(32) Close the lid, and put the white ink cartridge in position inside the printer.
<IMPORTANT>

W12 and W34 cartridges should correctly be placed at their original locations. Wrongly placed cartridges could cause a
printer malfunction.
(33) Repeat the same process to replace the other capping cartridge with the white ink pouch.
(34) On the operation panel, press .
Then, the white ink will be installed after the head is replaced with a new one.
<TIPS>

After the procedures are completed, the current screen will go back to the standby mode screen.
(35) Adjust the carriage speed.
<TIPS>

For details, refer to "2-5-1. CR (Carriage) speed adjustment".
(36) Perform the V-rating settings configuration.
<TIPS>

For details, refer to "2-5-2. V-rating setting".
(37) Adjust the ejection timing of the print head.
<TIPS>

For details, refer to "2-5-3. Firing adjustment".
(38) Perform the platen feed adjustment.
<TIPS>

For details, refer to "2-5-4. Platen feed adjustment".
(39) Make the position adjustment between the white head and the color head.
<TIPS>

For details, refer to "2-5-5. White/color alignment".