manualshive.com logo in svg

Brocade Communications Systems DCX 8510-8, Справочник по аппаратуре

Желаете получить полное описание Brocade Communications Systems DCX 8510-8? Скачайте бесплатно Hardware Reference Manual с нашего сайта. Этот мануал предоставит вам всю необходимую информацию о продукте. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

Blades available for the Brocade DCX 8510-8 (Continued)

TABLE 1   

Description

Name

Function

Brocade DCX
8510-8 core switch
blade

CR16-8

The CR16-8 blade contains the ASICs for switching between port blades.
Every port blade connects to each core switch blade. There can be up to 512
16-Gbps or 8-Gbps total ports for port blades. Each core switch blade connects
to 128 backplane ports. Core switch blades have additional front port
connectivity to connect multiple chassis and backplane connections for the
storage server blade. This core switch blade is compatible only with the
Brocade DCX 8510-8. Requires specific type of QSFP transceivers.

32-port 8-Gbps port
blade

FC8-32E

A 32-port Brocade port blade supporting 2, 4, and 8 Gbps Fibre Channel port
speeds. This port blade is compatible with the Brocade DCX 8510-8 and
Brocade DCX 8510-4. This blade requires Fabric OS v7.0.1 or later to run in
this chassis.

48-port 8-Gbps port
blade

FC8-48E

A 48-port Brocade port blade supporting 2, 4, and 8 Gbps Fibre Channel port
speeds. This port blade is compatible with the Brocade DCX 8510-8 and
Brocade DCX 8510-4. This blade requires Fabric OS v7.0.1 or later to run in
this chassis.

64-port 8-Gbps port
blade

FC8-64

A 64-port Brocade port blade supporting 2, 4, and 8 Gbps port speeds with
mSFPs. This port blade is compatible with the Brocade DCX 8510-8, Brocade
DCX 8510-4, Brocade DCX, and Brocade DCX-4S.

32-port 16-Gbps
port blade

FC16-32

A 32-port Brocade port blade supporting 2, 4, 8, 10, and 16 Gbps Fibre
Channel port speeds. The blade also supports port-based in-flight encryption/
decryption and compression/decompression. This port blade is compatible with
the Brocade DCX 8510-8 and Brocade DCX 8510-4 and requires Fabric OS
v7.0.0 or later to run in this chassis.

48-port 16-Gbps
port blade

FC16-48

A 48-port Brocade port blade supporting 2, 4, 8, 10, and 16 Gbps Fibre
Channel port speeds. The blade also supports port-based in-flight encryption/
decryption and compression/decompression. This port blade is compatible with
the Brocade DCX 8510-8 and Brocade DCX 8510-4 and requires Fabric OS
v7.0.0 or later to run in this chassis.

64-port 16-Gbps
port blade

FC16-64

A 64-port Brocade port blade supporting 4, 8, and 16-Gbps Fibre Channel port
speeds. The blade also supports port-based in-flight encryption/decryption and
compression/decompression. This port blade is compatible with the Brocade
DCX 8510-8 and Brocade DCX 8510-4 and requires Fabric OS v7.3.0 or later
to run in this chassis. Requires specific type of QSFP transceivers and those
are not the same as used in the core blades.

Fibre Channel over
Ethernet blade

FCOE10-24 The FCOE10-24 blade enables FCoE functionality over existing Ethernet

infrastructure utilizing CEE protocols. It has 24 10-GbE ports available. This
FCoE application blade is compatible with the Brocade DCX, Brocade
DCX-4S, and Brocade DCX 8510-8 chassis.This FCoE blade can be used in
the same chassis with only the FC8-32E and FC16-32 port blades. This FCoE
blade cannot be used with any other FC port blades or application blades in
the same chassis. Refer to the Fabric OS Release Notes for limitations in using
this blade.

Storage encryption
blade

FS8-18

The FS8-18 blade enables data cryptographic (encryption/decryption) and
data-compression capabilities for data-at-rest. It has 16 Fibre Channel optical
SFP ports. This application blade is compatible with the Brocade DCX 8510-8,
Brocade DCX 8510-4, Brocade DCX, and Brocade DCX-4S and requires
Fabric OS v7.0.0 or later to run in the 8510-4 and 8510-8 chassis.

Brocade DCX 8510-8 Overview

18

Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-08

Содержание DCX 8510-8

















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DCX 8510-8

Gateway 7250R Rack Mounting Instructions preview
7250R
Бренд: Gateway Страницы: 26
SafeNet Luna SA Configuration Manual preview
Luna SA
Бренд: SafeNet Страницы: 109
IBM totalstorage 200 Service Manual preview
totalstorage 200
Бренд: IBM Страницы: 180
Supermicro SUPERSERVER 6034H-X8R User Manual preview
SUPERSERVER 6034H-X8R
Бренд: Supermicro Страницы: 128
IBM 87401RU Installation And User Manual preview
87401RU
Бренд: IBM Страницы: 110
AIC FB128-LX User Manual preview
FB128-LX
Бренд: AIC Страницы: 79
Olive O3HD Quick Start Manual preview
O3HD
Бренд: Olive Страницы: 103
QUANTA QSSC-S99K 2U User Manual preview
QSSC-S99K 2U
Бренд: QUANTA Страницы: 177
Dell E74S Reference Manual preview
E74S
Бренд: Dell Страницы: 25
Dell EMC PowerEdge R340 Installation And Service Manual preview
EMC PowerEdge R340
Бренд: Dell Страницы: 92
Dell EMC PowerEdge R640 Deployment Manual preview
EMC PowerEdge R640
Бренд: Dell Страницы: 78
Dell E71S Reference Manual preview
E71S
Бренд: Dell Страницы: 25
Dell EMC PowerEdge R740 Installation And Service Manual preview
EMC PowerEdge R740
Бренд: Dell Страницы: 172
Dell EMC Core XC750 Installation And Service Manual preview
EMC Core XC750
Бренд: Dell Страницы: 186
Dell E53S001 Installation And Service Manual preview
E53S001
Бренд: Dell Страницы: 110
Dell E73S Installation And Service Manual preview
E73S
Бренд: Dell Страницы: 138
Dell EMC Connectrix EC-1700 Series Installation And Setup Manual preview
EMC Connectrix EC-1700 Series
Бренд: Dell Страницы: 110
Dell EMC PowerEdge T440 Installation And Service Manual preview
EMC PowerEdge T440
Бренд: Dell Страницы: 156

Бренды по названию

Популярные бренды

Загрузить еще бренды