Bosch VG5-7230-CPT5, Руководство по эксплуатации

Страница: 101 / 152

AUTODOME IP starlight 7000 HD Camera | en 101
Bosch Security Systems Operation Manual 2016-07 | 1.0 | F.01U.283.679
Intelligent Defog
With the Defog mode feature, visibility can be improved significantly when viewing foggy or
other low-contrast scenes.
–
On - Defog is always active.
– Off - Defog is disabled.
– Auto - Defog activates automatically as needed.
19.7 Lens Settings
Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
One Push (default; commonly called “Spot Focus”): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
– Auto Focus : Auto Focus is always active.
– Manual : Auto Focus is inactive.
!
Warning!
For tours, save presets using One Push (“Spot Focus“).
Focus speed
Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus
becomes blurred.
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off (default).
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
Constant (default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
–
Gain Control : switches to AGC.
– Shutter Speed : switches to default.
– Manual : camera must be manually adjusted to compensate for varying light conditions.
Auto iris level
Increases or decreases brightness according to the amount of light. Type a value between 1
and 15.
Maximum zoom speed
Controls the zoom speed.
Zoom limit
Select the appropriate limit for zooming the camera: 20x, 30x.
Digital zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process. Select
Standard (default) to enable this
feature in standard mode. Select Enhanced to enable this feature in enhanced mode. Select
Off to disable this feature.