AUTODOME IP starlight 7000 HD
Preparing the Bubble | en
67
Bosch Security Systems
Operation Manual
2016-07 | 1.0 | F.01U.283.679
1.
Use a non-permanent marking instrument (such as chalk or a carpenter pencil) to mark on
the ceiling the screw slot in the in-ceiling housing.
2.
Place the bubble over the Camera Module, and align it until it settles.
3.
Rotate the trim ring, not the bubble itself, clockwise until it locks in position in the
housing. The ring becomes tight and may be difficult to turn. Aligning the screw slots by
using the chalk or pencil mark as reference ensures that you align both screw slots.
!
Warning!
Trim ring can become deformed
If the trim ring is not turned completely, the screw slot on the trim ring will not be aligned
with the screw slot in the housing. You cannot see the screw slot in the housing when you are
turning the screw in the slot in the trim ring. You can turn the screw in the slot in the trim
ring, but miss the screw slot on the housing. Forcing the screw into the trim ring (without the
screw going into the screw slot in the housing) can deform the ring.
4.
Erase the chalk or pencil mark if desired.
Replace the bubble in a pendant housing
1.
Insert the bubble and trim ring assembly into the pendant housing.
2.
Rotate the assembly clockwise until it locks. The latch mechanism makes a click when it
locks.
Содержание VG5-7230-CPT5
Страница 1: ...AUTODOME IP starlight 7000 HD VG5 7230 CPT5 VG5 7230 EPC5 VG5 7230 EPR5 en Operation Manual ...
Страница 2: ......
Страница 151: ......