Bosch VG5-7230-CPT5, Руководство по эксплуатации

Страница: 130 / 152

130 en | Network AUTODOME IP starlight 7000 HD
2016-07 | 1.0 | F.01U.283.679 Operation Manual Bosch Security Systems
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter 0 (zero)
if you do not want any images to be sent.
Target
Select the target—the name of the account on the server—to which to save images.
When face recognition is available, selected images of the face can be sent to a target
account.
Enable
Click this checkbox to enable face detection.
File format
Select the file format in which to save images. Options are JPEG (default), YUV420, TIFF.
Target
Select the target—the name of the account on the server—to which to save images.
Timeout [s]
Enter the number of seconds after which image posting will time out. The default is 0 (no
timeout).
Maximum image width [px]
Enter a number for the maximum width, in pixels, for the saved images. For automatic width
selection, use value “0.”
23.7 Accounts
Four separate accounts can be defined for posting and recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time settings of the device have been
correctly synchronized.
Account name
Enter an account name to be shown as the target name.
IP address
Enter the IP address of the server on which you wish to save the JPEG images.
Login
Enter the login ID for the server.
Password
Enter the password that gives you access to the server. To verify the password, click the
Check button to the right.
Path
Enter the exact path on which you wish to post the images on the server. To browse for the
correct path, click the Browse button to the right.
Maximum bit rate
Enter the maximum bit rate for the JPEG images (in kbps).
23.8 IPv4 Filter
Use this setting to configure a filter that allows or blocks network traffic that matches a
specified address or protocol.
IP Address 1 / 2
Enter the IPv4 address that you want to allow or block