66
en | Preparing the Bubble
AUTODOME IP starlight 7000 HD
2016-07 | 1.0 | F.01U.283.679
Operation Manual
Bosch Security Systems
Figure 10.42: Pendant Bubble Release Opening
3.
Firmly rotate the bubble counterclockwise approximately 20 degrees until the bubble
assembly releases from the Pendant Housing.
Replace the trim ring (optional) (In-ceiling models)
The dome bubble for in-ceiling models of AUTODOME 7000 comes assembled with a white
trim ring. An optional black trim ring is supplied in the shipping box. To replace the white trim
ring, follow these steps:
1.
Remove the four (4) Phillips head screws from the inner ring.
2.
Remove the white trim ring.
3.
For In-ceiling models, verify that the trim ring gasket is in place. (Refer to the graphic in
Installing the Ceiling (IP54 Housing) Gasket, page 60
for an illustration of the correct
placement of the gasket.)
4.
Place the black trim ring over the inner ring.
5.
Replace and tighten the four (4) screws.
Replace the bubble in an in-ceiling housing
Figure 10.43: In-Ceiling Bubble
Содержание VG5-7230-CPT5
Страница 1: ...AUTODOME IP starlight 7000 HD VG5 7230 CPT5 VG5 7230 EPC5 VG5 7230 EPR5 en Operation Manual ...
Страница 2: ......
Страница 151: ......
