Bosch VG5-7230-CPT5, Руководство по эксплуатации

Страница: 70 / 152

70 en | Replacing an In-ceiling Acrylic Bubble AUTODOME IP starlight 7000 HD
2016-07 | 1.0 | F.01U.283.679 Operation Manual Bosch Security Systems
12 Replacing an In-ceiling Acrylic Bubble
Notice!
The following instructions are for bubbles VGA-BUBBLE-CCLA and VGA-BUBBLE-CTIA.
These bubbles come assembled with a white trim ring. An optional black trim ring is supplied.
To replace the white trim ring, follow steps 3 – 6. Otherwise, skip from step 2 to step 7.
Notice!
The following four (4) steps are for replacing the trim ring. These steps are optional. If you
are not replacing the trim ring, skip to step 7.
1. Remove the five (5) Phillips head screws from the inner ring.
2. Remove the white trim ring.
3. Place the black trim ring over the inner ring.
4. Replace and tighten the five (5) screws.
5. Clean the bubble according to the instructions in the section “Maintenance.”
6. Place the replacement bubble onto the in-ceiling housing, and rotate it clockwise
approximately 1/4 turn until it stops. Then tighten the lock-screw.