AUTODOME IP starlight 7000 HD
Configuration | en
83
Bosch Security Systems
Operation Manual
2016-07 | 1.0 | F.01U.283.679
Notice!
Depending on the PC network security settings, the user may need to add the new IP address
to the browser’s
trusted sites
list for the controls to operate.
Using the Web Server
1.
Set the
IP address
on the network device to
192.168.0.10
to ensure that the network
device and the camera are on the same Subnet.
2.
Launch your web browser (such as Microsoft Internet Explorer) and navigate to the
following URL: http://192.168.0.1. The web browser opens the
Live
page for the camera;
a security warning message appears.
3.
Select the box
Always Trust
, and then click YES.
4.
Click
Configuration
at the top right of the page.
5.
Select
Network
. The menu expands.
6.
Select
Network Access
. The page
Network Access
opens.
7.
Configure the settings on this page based on the addresses provided by your local
network administrator.
4
Click
Set and Reboot
. The camera will reset (go through the homing sequence, which
usually takes 30 seconds to complete), and then the
Live
page appears, with updated
video and the new
IP address
.
Notice!
Click the
Help on this page?
link if you need more information.
About the Configuration Page
The
Configuration
page is used to configure the unit and the application interface.
Navigation
1.
Click one of the menu items in the left window margin. The corresponding submenu is
displayed.
2.
Click one of the entries in the submenu. The web browser opens the corresponding page.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
Not every page has a
Set
button. Changes to pages without a
Set
button are set immediately.
If a page does show a
Set
button, you must click the
Set
button for a change to take effect.
Notice!
Save each change with the associated
Set
button.
Clicking the
Set
button saves the settings only in the current field. Changes in any other fields
are ignored.
Some changes only take effect after the unit is rebooted. In this case, the
Set
button changes
to
Set and Reboot
.
1.
Make the desired changes.
2.
Click the
Set and Reboot
button. The camera reboots and the changed settings are
activated.
All settings are backed up in camera memory so they are not lost even if the power fails. The
exception is the time settings, which are lost after 1 hour without power if no central time
server is selected.
Содержание VG5-7230-CPT5
Страница 1: ...AUTODOME IP starlight 7000 HD VG5 7230 CPT5 VG5 7230 EPC5 VG5 7230 EPR5 en Operation Manual ...
Страница 2: ......
Страница 151: ......
