background image

Warning

Warning

Caution

0

7

5

(ft)

20

10

0

10

20

0 (ft)

6

5

7

1.8

8

2.4

0

0

10

20

30

40

50(ft)

0

10

20

30

40

50(ft)

0

5

10

15(m)

0

5

10

15(m)

5(ft)
0

5

1
0
1
2

2

0

10

20

30

40

60

70

)t

f(

0

8

0

5

0

5

10

15

20

24(m)

0

10

20

30

40

60

70

)t

f(

0

8

0

5

0

5

10

15

20

24(m)

0 (ft)

6
8

1.8
2.4

0

1m

1

2

MW

(CDX-DAM only)
PIR

MW 

(CDX-DAM only)
PIR

Wall 

tamper 

knockout

INSTALLATION INSTRUCTIONS

No.59-1900-4

CDX series

CDX series

TOP VIEW

SIDE VIEW

TOP VIEW

SIDE VIEW

DETECTION AREA

3

KNOCKOUTS

2

INSTALLATION HINTS

1

Corner

mount 

knockout

Mounting 

knockout

Corner

mount 

knockout

Wiring knockout

COMPLIANCE

How to release the unit base >>

Put up the base

Remove

When using a wall tamper >>

Use the knockout for a wall 

tamper. If the main unit is taken 

from the wall, the gray section 

will break away and stay on the 

wall and the tamper switch will 

operate. 

When installing on a plaster 

board wall or other soft 

material, cut out the gray area 

from the back plate.

Note >>

This symbol indicates prohibition.

Grade 3 INDOOR DETECTOR

Grade 3 INDOOR DETECTOR

• Use both knockouts (1) and (2) with included screws. 

  (Self tapping 3 X 16 mm: 3 pcs.)

• For corner installation, use both knockouts (3) and (4) with 

included screws. (Self tapping 3 X 16 mm: 3 pcs.)

• CDX series complies with following Directives / Standards.

Directive: EMC Directive 2004/108/EC

Applied Standards: EN 50130-4: 2011

EN 55022: 2006

• EN50131-1 Grades and Environmental Class:

Security Grade 3 and Environmental Class II.

Applied Standards: EN 50131-2-2 (CDX-NAM / CDX-AM)

EN 50131-2-4 (CDX-DAM)

Tested and certified by Telefication.

• CDX DAM also complies with following Directives / Standards

marked                          Class II, 

Directive: R&TTE Directive 1999/5/EC

Applied Standards: EN 300 440-1: 2009

EN 300 440-2: 2009

EN 301 489-1: 2008

EN 301 489-3: 2002

EN 50371: 2002

EN 60950-1: 2006 +A11: 2009

The following table indicates the areas of intended use of the equipment 

and any known restrictions. For countries not included in this list, 

please consult the responsible Spectrum Management Agency.

* Specifications and design are subject to change without prior notice.

SPECIFICATIONS

10

FCC ID: DC9 OPMW      IC: 4012A-OPMW

This device complies with Part 15 of the FCC Rules. Operation is 

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including 

interference that may cause undesired operation.

COMPLIANCE

OPTION

LED INDICATION

9

Light

Blink

OFF

Red

Light

Blink

OFF

Red Green

Yellow

Blinks for approx. 60 sec.

Lights for 2 sec.

Blinks 3 times and goes off for 3 sec, and repeats.

Blinks 4 times and goes off for 3 sec, and repeats.

Blinks 5 times and goes off for 3 sec, and repeats.

DETECTOR CONDITION

LED INDICATOR

Warm-up

Alarm

Trouble 

output

Anti-masking 

detection

Local 

Self test 

Low voltage 

detection

Remote 

Self test 

x3 times

x4 times

x5 times

Model

Country of intended use
Austria
Belgium
Denmark
Finland
France
Greece
Ireland
Italy

Luxembourg
The Netherlands
Spain
Sweden
United Kingdom
Other non-EU: Iceland
Norway
Switzerland

9.900GHz

10.525GHz
10.525GHz

9.900GHz

10.587GHz
10.525GHz
10.587GHz
10.525GHz

10.525GHz
10.525GHz
10.525GHz
10.525GHz
10.587GHz
10.525GHz
10.525GHz
10,525GHz

Restrictions Country of intended use Restrictions

CDX-NAM

CDX-AM

CDX-DAM

Passive infrared

Passive infrared & 

Microwave

EN50131-2-2 (Grade 3)

AIR type

24m × 2m (80ft. × 7ft.) 

narrow [20 zones]

15m × 15m (50ft. × 50ft.) 

85° wide [82 zones]

9 - 18VDC

N.C. 28V DC 0.2A max.

N.C. 28V DC 0.2A max.

-10°C - +50°C (14°F - 122°F)

No alarm 10V/m

1.8 - 2.4m (6ft. - 8ft.)

180g (6.3oz)

140×70×52.3mm (5.51×2.76×2.06 inches)

95% max.

N.C. Opens when cover is removed or the 

wall tamper switch operates.  28V DC 0.1A max.

EN50131-2-4

 (Grade 3)

17mA (normal) / 20mA (max.) 

at 12V DC

19mA (normal) / 26mA (max.) 

at 12V DC

Detection method
Detector 

standard

 Masking 

detection method
PIR Coverage 

[Detection zones]
Power input

Alarm output

Tamper output

Trouble output
Operating 

temperature

Environmental 

humidity
RF interference
Mounting height

Weight
Dimensions 

(H×W×D) 

Current 

consumption

OPTEX CO., LTD. (JAPAN)

(ISO9001 Certified) (ISO14001 Certified)
5-8-12 Ogoto Otsu Shiga 520-0101 JAPAN

TEL: +81-77-579-8670  FAX: +81-77-579-8190

URL: http://www.optex.co.jp/e/

OPTEX INCORPORATED (USA)

TEL: +1-909-993-5770

Tech: (800)966-7839

URL: http://www.optexamerica.com/

OPTEX (EUROPE) LTD. (UK)

TEL: +44-1628-631000

URL: http://www.optex-europe.com/

OPTEX SECURITY SAS (FRANCE)

TEL: +33-437-55-50-50

URL: http://www.optex-security.com/

OPTEX SECURITY Sp. zo.o. (POLAND)

TEL: +48-22-598-05-55

URL: http://www.optex.com.pl/

OPTEX KOREA CO., LTD. (KOREA)

TEL: +82-2-719-5971

URL: http://www.optexkorea.com/

OPTEX (DONGGUAN) CO., LTD.

SHANGHAI OFFICE (CHINA)

TEL:+86-21-34600673

URL:http://www.optexchina.com/

FA-1W:  Wall Mount Bracket

 

Adjustable ±45° (Horizontally), 0-20° (Vertically downwards)  

FA-3:   Compact Wall & Ceiling Bracket

 

Adjustable ±45°(Horizontally), 0-10° (Vertically downwards)

PEU:   Plug-in EOL resistors unit

 

Please ask your supplier for more information about the

 

available type.

NOTE

CDX series is only a part of a complete system, therefore we 

cannot accept complete responsibility for any damages or other 

consequences resulting from an intrusion. 

Anti-masking 

detection

Local 

Self test 

Low voltage 

detection

Remote 

Self test 

x3 times

x4 times

x5 times

Blinks for approx. 60 sec.

Lights for 2 sec.

Blinks 3 times and goes off for 3 sec, and repeats.

Blinks 4 times and goes off for 3 sec, and repeats.

Blinks 5 times and goes off for 3 sec, and repeats.

Green lights for 2 sec.

Yellow Lights for 2 sec.

DETECTOR CONDITION

LED INDICATOR

Warm-up

Alarm

PIR detection

MW detection

Trouble 

output

 15m (50ft.) Wide Angle with Down Zone (CDX-AM/CDX-DAM)

 24m (80ft.) Long Range (CDX-NAM)

 Respected Double Conductive Shielding (CDX-AM/CDX-NAM)

- Extremely High Light and RFI Immunity

 Extreme Tough Microwave Module (CDX-DAM)

 PLUG-IN EOL Resistors (PEU) (OPTION)

 Advanced IR Beam Anti-Masking Technology

Caution >>

Do not touch the 

microwave unit to avoid 

breakdown caused by 

static electricity.

(4)

(3)

(1)
(2)

CDX-AM

CDX-NAM

CDX-DAM

CDX-AM

CDX-NAM

CDX-DAM

CDX-AM

CDX-NAM

CDX-DAM

CDX-AM

CDX-NAM

CDX-DAM

CDX-AM

   PIR with active IR anti-masking (Grade 3)

CDX-NAM

   CDX-AM with long and narrow lens (Grade 3)

CDX-DAM

   PIR & Microwave with active IR anti-masking (Grade 3) 

PD6662: 2010

PD6662: 2010

(m)

(m)

(m)

(m)

* Do not obscure partially or 

completely the detector’s 

field of view.

Отзывы: