manualshive.com logo in svg

Bosch MSI 60, Руководство пользователя

Поделиться
Скачать
Bosch MSI 60 Скачать руководство пользователя страница 45

CAN Bus | 9

Bosch Motorsport

Modular Sensor Interface MSI 60

45 / 120

9.2.5 Conversion to Physical Values

a) Enter factor (gain) for conversion to physical value.
b) Enter offset for conversion to physical value.
c) Select type of physical value.
d) Select unit of physical value.
e) Enter minimum physical limit of the channel (for manual setup).
f) Enter maximum physical limit of the channel (for manual setup).
g) Check the box to automatically adjust the limits of the channel.

9.2.6 Special Features

CAN analyzer functionality

This functionality is only available, if a MSA-Box (I & II) is used to connect the MSI 60 to

the PC.

Choose the CAN bus that is connected to the MSA-Box to display the raw value and the

converted physical value here.

Automatic creation of online measurement sheets

The CAN channel can be automatically inserted to a measurement sheet. Insert a name for

a new sheet or select an existing sheet from the listbox.

For an online view of the value measured by the MSI 60, insert the channel in an online

measurement sheet which is described in the next chapter.

9.2.7 Online View of CAN Channels in Vehicle

1.

Double-click on ‘Sheet 1’ in Project Tree.

Содержание MSI 60

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды