BMZ ESS 7.0, Руководство по эксплуатации

Страница: 26 / 113

Safety
Version 1.0 Page 26 of 113

Pay attention to the risk of electric arcs when pulling the NH1 isolator
under the full load of the battery
Prevent these hazardous situations. Otherwise, they may lead to
insignificant or minor injuries.
1.2.7 Safety instructions for battery interiors
Target group
These safety instructions are intended for all persons who are authorised to work on battery modules of the
battery storage system.
Adhere to the operating manual
Always follow the instructions in the operating manual and in the specifications when working on these
modules.
Safety instructions for battery module
DANGER
Danger due to leaking electrolyte
Only the trained experts and persons qualified and approved by BMZ
GmbH may work on the battery. Modifications or manipulations in the
battery may lead to considerable safety risks and are therefore
prohibited.

Do not solder cables to the battery.

Do not short circuit the battery.

Never open, dismantle, drill and crush the battery.

Never allow the battery to fall.

Do not expose batteries to rain or dip them in liquids.

Do not touch damaged batteries with bare hands. Lithium can
cause severe skin burns. Handle damaged batteries with suitable
safety equipment and tools.

Do not use defective, damaged or leaked batteries.

Do not use batteries that show discolouration, deformations,
unusual noises or severe heat.
Prevent these hazardous situations. Otherwise, they will lead to
deaths or serious injuries.