BMW X2 2022, Руководство пользователя

Страница: 131 / 308

Resetting average values
Press and hold the button on the turn signal
lever.
The average consumption since delivery from
the factory cannot be reset.
Engine temperature display
Principle
Depending on the vehicle equipment, the cur-
rent engine temperature is displayed, based
on a combination of the coolant temperature
and engine oil temperature. As soon as the op-
timum operating temperature has been at-
tained, the indicator is in the center position.
General information
If the engine oil or coolant, and thus the en-
gine, become too hot, a Check Control mes-
sage is displayed too.
To check the coolant level, refer to page
263 .
Display
Distance to destination
Depending on the vehicle equipment, the dis-
tance remaining to the destination is displayed
if a destination is entered in the navigation
system before the trip is started.
The distance to the destination is adopted au-
tomatically.
Arrival time
Depending on the vehicle equip-
ment, the estimated arrival time
is displayed if a destination is
entered in the navigation system
before the trip is started.
The prerequisite is that the time must be cor-
rectly set.
Trip computer on the Control
Display
Principle
The trip computer displays different vehicle
data on the Control Display, such as average
values.
General information
Two types of trip computers are available on
the Control Display:
▷ "Onboard info": average values, such as
the consumption, are displayed. The values
can be reset individually.
▷ "Trip computer": the values deliver an over-
view of a specific distance covered and can
be reset as often as necessary.
Calling up the trip computer or travel
computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info" or "Trip computer"
Seite 131
Displays CONTROLS
131
Online Edition for Part no. 01405A540A1 - II/22