BMW X2 2022, Руководство пользователя

Страница: 284 / 308

brake disks and brake pads and protects them
against corrosion.
Chrome surfaces
Carefully clean components such as the radia-
tor grille or door handles with plenty of water, if
necessary, with auto shampoo added, particu-
larly when they have been exposed to road
salt.
Rubber components
Environmental influences can cause surface
contamination of rubber parts and a loss of
gloss. Use only water and suitable cleaning
agents for cleaning.
Treat especially worn rubber parts with rubber
care products at regular intervals. When clean-
ing rubber seals, do not use any silicon-con-
taining vehicle care products in order to avoid
damage or noises.
Wiper blades
The wiper blades are cleaned by using the
washer system.
Avoid cleaning the wiper blades manually, as
this may reduce wiper performance.
Fine wood parts
Clean fine wood facing and fine wood compo-
nents only with a moist rag. Then dry with a
soft cloth.
Plastic components
NOTICE
Solvent cleaners that contain alcohol or sol-
vents, such as lacquer thinners, cold cleaning
agents, fuel and such, can damage plastic
parts. There is a risk of damage to property,
among other potential damage. Clean with a
microfiber cloth. Dampen the cloth lightly with
water, if needed.
Clean with a microfiber cloth.
Dampen the cloth lightly with water, if needed.
Do not soak the headliner.
Seat belts
Warning
Chemical solvent cleaners can destroy the
seat belt fabric. Missing protective effect of
the seat belts. There is a risk of injury or dan-
ger to life. Use only a mild soap solution for
cleaning the seat belts.
Dirty belt straps impede the reeling action and
thus have a negative impact on safety.
Use only a mild soap solution, with the seat
belts clipped into their buckles.
Seat belts should only be allowed to retract if
they are dry.
Carpets and floor mats
Warning
Objects in the driver's footwell can limit the
pedal travel or block a depressed pedal.
There is a risk of accident. Stow objects in the
vehicle such that they are secured and can-
not enter into the driver's footwell. Use floor
mats that are suitable for the vehicle and can
be safely attached to the floor. Do not use
loose floor mats and do not layer several
floor mats. Make sure that there is sufficient
clearance for the pedals. Ensure that the floor
mats are securely fastened again after they
were removed, for instance for cleaning.
Floor mats can be removed from the car's inte-
rior for cleaning.
If the floor carpets are very contaminated,
clean with a microfiber cloth and water or a
textile cleaner. To prevent matting of the car-
pet, rub back and forth in the driving direction
only.
Seite 284
MOBILITY Vehicle Care
284
Online Edition for Part no. 01405A540A1 - II/22