BMW X2 2022, Руководство пользователя

Страница: 118 / 308

Before unlocking the transmission lock man-
ually, set the parking brake to prevent the vehi-
cle from rolling away.
1. Loosen the selector lever sleeve at the bot-
tom from the center console.
2. Lift the sleeve. Detach the cable connector,
if needed.
3. Using the screwdriver from the onboard ve-
hicle tool kit, refer to page 267 , press the
yellow release lever downward, arrow.
4. Press the button on the front of the selector
lever and move the selector lever back
slightly.
Release the release lever.
5. Bring the selector lever into the desired po-
sition.
For additional information, see the chapter on
tow-starting and towing.
Releasing the transmission lock
electronically: with a tap-operated
selector lever
General information
Electronically unlock the transmission lock to
maneuver vehicle from a hazardous area.
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from roll-
ing away.
Engaging selector lever position N
Unlocking is possible, if the starter can crank
the engine.
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter
must audibly start.
3. Press the button on the selector lever, ar-
row 1, and press and hold the selector lever
into selector lever position N, arrow N, until
selector lever position N is displayed in the
instrument cluster.
A Check Control message is displayed.
4. Release the selector lever.
5. Release brake, as soon as the starter
stops.
6. Maneuver the vehicle from the hazardous
area and secure it against rolling away.
Seite 118
CONTROLS Driving
118
Online Edition for Part no. 01405A540A1 - II/22