BMW X2 2022, Руководство пользователя

Страница: 263 / 308

Coolant
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features and functions
that are not necessarily available in your vehi-
cle, e.g., due to the selected options or country
versions. This also applies to safety-related
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
General information
Coolant consists of water and coolant additive.
Not all commercially available additives are
suitable for the vehicle. The vehicle manufac-
turer recommends using coolant with the
BMW LC-18 specification. Do not mix additives
of different colors. Observe the water - additive
mixture ratio of 50:50. Information about suita-
ble additives is available from a dealer’s serv-
ice center or another qualified service center or
repair shop.
Safety information
Warning
With the engine hot and the cooling system
open, coolant can escape and lead to scald-
ing. There is a risk of injury. Only open the
cooling system with the engine cooled down.
Warning
Additives are harmful and incorrect additives
can damage the engine. There is a risk of in-
jury and risk of damage to property. Do not
allow additives to come into contact with skin,
eyes or articles of clothing. Use suitable addi-
tives only.
Coolant level
Checking
There are yellow minimum and maximum
marks in the coolant reservoir.
1. Let the engine cool down.
2. Open the hood.
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres-
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. The coolant level is correct if it lies between
the minimum and maximum marks in the
filler neck.
6. Close the lid.
Seite 263
Coolant MOBILITY
263
Online Edition for Part no. 01405A540A1 - II/22