BMW X2 2022, Руководство пользователя

Страница: 107 / 308

▷ In resting position: turn the switch down-
ward, arrow 3. The switch automatically re-
turns to its idle position when released.
▷ In intermittent operation: turn the switch
further, arrow 2. The switch automatically
returns to its interval position when re-
leased.
The function is deactivated if the washer fluid
reservoir fill level is low.
Fold-out position of the wipers
Principle
The fold-out position enables the wipers to be
folded out from the windshield.
General information
Important, for instance when changing the
wiper blades or for folding out under frosty
conditions.
Safety information
Warning
If the wipers start moving in the folded away
state, body parts can be jammed or damage
may occur to parts of the vehicle. There is a
risk of injury or risk of damage to property.
Make sure that the vehicle is switched off
when the wipers are in the folded away state
and the wipers are folded in when switching
on.
NOTICE
If the wipers are frozen to the windshield, the
wiper blades can be torn off and the wiper
motor can overheat when switching on.
There is a risk of damage to property, among
other potential damage. Defrost the wind-
shield prior to switching the wipers on.
Folding out the wipers
1. Switch the ignition on and off again.
2. Press and hold the wiper lever down, until
the wipers stop in a close to vertical posi-
tion.
3. Fold the wipers all the way out from the
windshield.
Folding in the wipers
After the wipers are folded back down, the
window wiper system must be reactivated.
1. Fold the wipers back in onto the windshield.
2. Turn on the ignition.
3. Push wiper lever down. Wipers return to
their resting position and are ready again
for operation.
Seite 107
Driving CONTROLS
107
Online Edition for Part no. 01405A540A1 - II/22