BMW X2 2022, Руководство пользователя

Страница: 113 / 308

Transmission with a tap-operated
selector lever
The selector lever positions R, N, and D are
selected by tapping the selector lever forward
or back. The selector lever automatically re-
turns to the center position when released.
The selector lever position P is engaged by
pressing the P button on the selector lever or,
in certain situations, automatically, refer to
page 113 .
Selector lever positions
Gear position D
Selector lever position for normal driving. All
gears for forward travel are activated automat-
ically.
R is reverse
Engage selector lever position R only when the
vehicle is stationary.
Neutral N
The vehicle may be pushed or roll without driv-
etrain, for instance in car washes, refer to
page 115 , in selector lever position N.
Parking position P
General information
Selector lever position, for instance for parking
the vehicle.
The transmission blocks the drive wheels in
selector lever position P.
Engage selector lever position P only when the
vehicle is stationary.
Before exiting the vehicle, make sure that se-
lector lever position P is set. Otherwise, the ve-
hicle may begin to move. Also set parking
brake.
Automatic parking position for a transmission
with a tap-operated selector lever
Selector lever position P is engaged automati-
cally in situations such as the following:
▷ After the engine is switched off when the
vehicle is in the radio-ready state, refer to
page 97 , or when the ignition is switched
off, refer to page 97 , while selector lever
position R, D or M/S is engaged.
▷ If the driver's seat belt is unbuckled, the
driver's door is opened, and the brake
pedal is not pressed while the vehicle is
stationary and selector lever position D,
M/S or R is engaged.
▷ After the ignition has been switched off
while selector lever position N is engaged.
Engaging selector lever positions:
with a latching selector lever
General information
To prevent the vehicle from creeping after you
select a gear position, maintain pressure on
the brake pedal until you are ready to drive off.
Functional requirements
The selector lever can only be taken out of se-
lector lever position P if the ignition is on or the
engine is running.
Engaging selector lever position D, N,
R, or P
With the vehicle stationary, depress the brake
pedal before shifting out of selector lever posi-
tion P or N; otherwise, the gearshift block will
Seite 113
Driving CONTROLS
113
Online Edition for Part no. 01405A540A1 - II/22