BMW X2 2022, Руководство пользователя

Страница: 272 / 308

Register the battery to the vehicle
The manufacturer of the vehicle recommends
that you have a dealer's service center or an-
other qualified service center or repair shop
register the vehicle battery to the vehicle after
the battery has been changed. Once the bat-
tery has been registered again, all comfort fea-
tures will be available without limitation and
any Check Control messages displayed which
relate to comfort features will disappear.
Charging the battery
General information
Make sure that the battery is always suffi-
ciently charged to guarantee that the battery
remains usable for its full service life.
A discharged battery is indicated by a
red indicator light.
Charge the battery when acceleration is insuffi-
cient.
The following circumstances can have a nega-
tive effect on the performance of the battery:
▷ Frequent short-distance drives.
▷ Stationary periods of more than one month.
Safety information
NOTICE
Battery chargers that charge the vehicle bat-
tery via sockets or cigarette lighters in the ve-
hicle may overload or damage the 12 V elec-
trical system. There is a risk of damage to
property, among other potential damage.
Only connect battery chargers for the vehicle
battery to the jump-start terminals in the en-
gine compartment.
Charging the battery
Charge the battery only when the engine is off
and via the jump-start terminals, refer to
page 277 , in the engine compartment.
Power interruption
After a power interruption, some equipment
needs to be newly initialized or individual set-
tings updated, for example:
▷ Memory function: store the positions again.
▷ Time: update.
▷ Date: update.
▷ Glass sunroof: initialize the system.
Disposing of old batteries
Have old batteries disposed of by a
dealer's service center or another
qualified service center or repair shop
or take them to a collection point.
Maintain the filled battery in an upright position
for transport and storage. Secure the battery
so that it does not tip over during transport.
Fuses
Safety information
Warning
Incorrect and repaired fuses can overload
electrical lines and components. There is a
risk of fire. Never attempt to repair a blown
fuse. Do not replace a nonworking fuse with a
substitute of another color or amperage rat-
ing.
Seite 272
MOBILITY Replacing components
272
Online Edition for Part no. 01405A540A1 - II/22