BMW X2 2022, Руководство пользователя

Страница: 122 / 308

Orange lights
Active Cruise Control
The number bars shows the selected
distance from the vehicle driving
ahead.
Camera-based cruise control with Stop&Go
function, refer to page 170 .
Vehicle detection, Active Cruise Control
Indicator light illuminates: a vehicle has
been detected ahead of you.
Indicator light flashes: the conditions
are not adequate for the system to work.
The system was deactivated but applies the
brakes until the driver actively resumes control
of the vehicle by pressing on the brake pedal
or accelerator pedal.
Yellow lights
Anti-lock Braking System
The Brake Assistant function may not
activate. Avoid abrupt braking. Take
the longer braking distance into ac-
count.
Have the system immediately checked
by a dealer's service center or another
qualified service center or repair shop.
Dynamic Stability Control
Indicator light blinks: Dynamic Stability
Control controls the drive and brake
forces. The vehicle is stabilized. Re-
duce speed and modify your driving style to
the driving circumstances.
Indicator light illuminates: the Dynamic Stabil-
ity Control has malfunctioned.
Have the system checked by a dealer's service
center or another qualified service center or re-
pair shop.
Dynamic Stability Control, refer to page 163 .
The Dynamic Stability Control deactivated or
the Dynamic Traction Control activated
The Dynamic Stability Control is deacti-
vated or the Dynamic Traction Control
is activated.
Dynamic Stability Control, refer to page 163 ,
and Dynamic Traction Control, refer to
page 165 .
Flat Tire Monitor
The flat tire monitor reports a tire pres-
sure loss in a tire.
Reduce your speed and stop cau-
tiously. Avoid sudden braking and steering
maneuvers.
Flat tire monitor, refer to page
149 .
Tire pressure monitor
The indicator light illuminates: the Tire
Pressure Monitor reports a low tire
pressure or a flat tire. Follow the infor-
mation in the Check Control message.
The indicator light flashes and is then illumi-
nated continuously: flat tires or tire pressure
losses cannot be detected.
▷ Fault caused by systems or devices with
the same radio frequency: after leaving the
area of the interference, the system auto-
matically becomes active again.
▷ The Tire Pressure Monitor could not com-
plete the reset: reset the system again.
▷ A wheel without wheel electronics is
mounted: have it checked by a dealer’s
service center or another qualified service
center or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire pressure monitor, refer to page 145 .
Seite 122
CONTROLS Displays
122
Online Edition for Part no. 01405A540A1 - II/22