BMW X2 2022, Руководство пользователя

Страница: 110 / 308

washer system when the washer fluid reser-
voir is empty.
Cleaning the windshield
Pull the lever.
The washer fluid is sprayed on the windshield,
and the wipers are turned on briefly.
In addition, the headlights are cleaned at regu-
lar intervals when the vehicle lighting is
switched on.
Windshield washer nozzles
The washer jets are automatically heated
whenever the ignition is switched on.
Rear wiper
Switching on the rear wiper
Turn the outer switch upward.
▷ Resting position of the wiper, position 0.
▷ Intermittent operation, arrow 1. When re-
verse gear is engaged, the system switches
to continuous operation.
Clean the rear window
Turn the outer switch in the desired direction.
▷ In resting position: turn the switch down-
ward, arrow 3. The switch automatically re-
turns to its idle position when released.
▷ In intermittent operation: turn the switch
further, arrow 2. The switch automatically
returns to its interval position when re-
leased.
The function is deactivated if the washer fluid
reservoir fill level is low.
Fold-out position of the wipers
Principle
The fold-out position enables the wipers to be
folded out from the windshield.
General information
Important, for instance when changing the
wiper blades or for folding out under frosty
conditions.
Safety information
Warning
If the wipers start moving in the folded away
state, body parts can be jammed or damage
may occur to parts of the vehicle. There is a
risk of injury or risk of damage to property.
Make sure that the vehicle is switched off
when the wipers are in the folded away state
and the wipers are folded in when switching
on.
NOTICE
If the wipers are frozen to the windshield, the
wiper blades can be torn off and the wiper
motor can overheat when switching on.
There is a risk of damage to property, among
Seite 110
CONTROLS Driving
110
Online Edition for Part no. 01405A540A1 - II/22