BMW X2 2022, Руководство пользователя

Страница: 115 / 308

selector lever automatically returns to the
center position when released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is to roll without
its own power for a short distance, for instance
in a car wash, or be pushed.
Engaging selector lever position N:
with a latching selector lever
1. Turn on the ignition.
2. If necessary, release the parking brake.
3. Depress the brake pedal.
4. Touch the selector lever lock and engage
selector lever position N.
5. Release brake.
The vehicle can roll.
If there is a malfunction, you may not be able
to change the selector lever position.
Manually unlock the transmission lock, if
needed, refer to page 117 .
Engaging selector lever position N:
with a tap-operated selector lever
NOTICE
Selector lever position P is automatically en-
gaged when the ignition is switched off.
There is a risk of damage to property, among
other potential damage. Do not switch igni-
tion off in car washes.
1. Start the engine while pressing on the
brake pedal.
2. If necessary, release the parking brake.
3. Depress the brake pedal.
4. Touch the selector lever lock and engage
selector lever position N.
5. Switch the engine off.
In this way, the ignition remains switched
on, and a Check Control message is dis-
played.
The vehicle can roll.
Irrespective of the ignition, the selector lever
position P is automatically engaged after ap-
prox. 15 minutes.
If there is a malfunction, you may not be able
to change the selector lever position.
Electronically unlock the transmission lock, if
needed, refer to page 118 .
Kickdown
Kickdown is used to achieve maximum driving
performance.
Step on the accelerator pedal beyond the re-
sistance point at the full throttle position.
Seite 115
Driving CONTROLS
115
Online Edition for Part no. 01405A540A1 - II/22