55
5.
Set to
12V
for the 12V test system and
24V
for the 24V test system.
6.
Use the key to select the profile of
1 / 2 / 3 / 4
(12 V only)
and use
keys to
toggle between the four options.
7.
Use the
key to select
Repeat
and press
. This option allows the user to repeat
the profile up to 100 times. Once a value is selected, press
to confirm.
8.
Use the
key to select
Delay
and press
. This option allows the user to delay the
repeated profile up to 100 seconds. Once a value is selected, press
to confirm.
9.
Use the
key to select
Off/On
and use
keys to toggle between the two options.
Choose
On
to be able to run the function.
10.
Once both parameters are set, press
to confirm the changed settings and press
several times to exit the menu. If the Starting profile function was setup properly,
the
Trig
indicator will be highlighted and
Starting profile
will be shown on the front
panel, shown below.
11.
To enable the Short voltage drop function, press the
key, on the front panel. The
proper voltage (12V or 24V) should be metered on the front panel display.
12.
To run the Starting profile function press
and
to trigger the test to run.
13.
Repeat step 8 to trigger the function to run as many times as needed or setup the
repeat functionality.
Note: If any automotive testing is running the
will blink to indicate so. To stop
any test from running further, press
and
.
ISO16750-2 profile
S tartin g p rof ile
0.000V 0.000A
0.0 W
S tart in g p ro file
Trig
