46
8.
Once these two sequences are selected (active), press
to see the following:
9.
The display prompts the user to enter the number of times to repeat sequence #1 as
part of the program (list). In this example, use the current adjust knob or the numeric
keypad to enter
2
. Press
and the same prompt will immediately follow for
sequence #2. Enter
3
and then press
.
10.
Now it will display the following to confirm saving the program (list).
11.
Press key to select
Yes
and press
to save the program (list) into memory.
12.
If stored successfully, the display will show a message
Save Success!
After a few
seconds, it will return to the
LIST
menu.
Recall and Run Program
Once the sequence(s) and program are configured and stored into memory, they can be recalled
and triggered to run.
Recall Program
Follow the steps below to recall a stored program from memory:
FILE
Ac ti ve Seq : 0 987654 3YY
SEQ REPEAT
S eq 1 Repe at : 1
SAVE LIST
N o Yes
