45
3.
This parameter is configured to limit the maximum power of the program (list) when it is
executed. Leave it default to
1200.0
for maximum power output. Press
and the
following will display:
4.
The display prompts the user to enter the number of times to repeat the program (list).
For this example, enter
5
with the numeric keypad and then press
.
Note: The maximum number of repeat times is 65535 times.
5.
The next display will show the following:
6.
This is similar to step 5 and 6 in the previous section for
Configure Sequence
Parameters
. Each of the numbers on the display represents the sequence numbers
stored in memo
ry, with “
0
” representing sequence # 10.
7.
In this example, only sequence #1 and sequence #2 will be executed. Therefore, use the
numeric keypad and press 1 and 2 so that both of those numbers on the display will
toggle to “
Y
” in their places like the
following:
EDIT LIST POWER
L ist Powe r = 120 0.0 W
EDIT LIST REPEAT
L ist Re pe at = 1
FILE
Ac ti ve Seq : 0 987654 321
