53
4.
While
Short voltage drop
is flashing, press
to access that option. Set to
12V
for
the 12V test function and
24V
for the 24V test function.
5.
Use the key to select
Off/On
and use keys to toggle between the two options.
Choose
On
to be able to run the function.
6.
Once both parameters are set, press
to confirm the changed settings and press
several times to exit the menu. If the Short voltage drop function was setup
properly, the
Trig
indicator will be highlighted and
Short voltage drop
will be shown on
the front panel, shown below.
7.
To enable the Short voltage drop function, press the
key, on the front panel. The
proper voltage (12V or 24V) should be metered on the front panel display.
8.
To run Short voltage drop function press
and
to trigger the test to run.
9.
Repeat step 8 to trigger the function to run as many times as needed.
Profile for reset
Follow the steps below to set up the ISO16750-2:2012(E) Profile for the reset test function:
1.
Access the main menu by pressing
and the
.
2.
Use the key to select
FUNC.
and press
.
3.
Use the key to select
ISO16750-2
and press
. The screen below will display:
4.
While
Short voltage drop
is flashing, use keys to toggle to
Profile for the reset
test
(shown below)
and press
to access that option.
ISO16750-2 profile
S ho rt vol tage d rop
0.000V 0.000A
0.0 W
S ho rt voltage d rop
Trig
