31
2.
Select
10v-M
or
5v-M
so that it is blinking. Use the keys to change between
10v-
M
and
5v-M
.
–
0
–
5 V scale is used for monitoring 0
–
100% of output.
10v-M
–
0
–
10 V scale is used for monitoring 0
–
100% of output.
3.
Press
when finished making the selection.
4.
Press
several times to exit the menu.
Configure Control Source
Follow the steps below to configure the source to use for programming the voltage and current
output.
Note: Voltage programming is on Pin 20 and current programming is on Pin 22 of the
DB25 Analog interface.
1.
From the
CONFIG
menu, browse and select
Ext-Ctrl
and press
. The following
screen will display:
2.
Select the second item
10v/10k-P
or
5v/5k-P
so that it is blinking. Use the keys
to change between
10v/10k-P
and
5v/5k-P
.
5v/5k-P
–
0
–
5 V (for voltage) or 0
–
5 k
Ω
(for resistance) is used for programming the
voltage and current output.
10v/10k-P
–
0
–
10 V (for voltage) or 0
–
10 k
Ω
(for resistance) is used for programming
the voltage and current output.
3.
Press
when finished making the selection.
4.
Press
several times to exit the menu.
Ext – Ctrl Setup
1 0v-M 1 0v /10 k-P V- P Of f
Ext – Ctrl Setup
1 0v-M 1 0v /10 k-P V- P Of f
