25
Recall Settings
1.
Press
. Notice the button will be lit and the cursor on the display will disappear.
This indicates
Recall
mode. Instrument settings can only be recalled when the
instrument enters this mode.
2.
Use the keypad to enter the memory location you want to recall. Enter between
0 to 9
.
3.
Once entered, the saved settings at the location will be immediately recalled.
Note: When in Recall mode, users can recall settings from different locations
without having to press additional keys each time. For example, you can
press 1 to recall settings in location one, and then press 5 to recall
settings in location 5 on the fly.
4.
To exit
Recall
mode, press
and it will no longer be lit. The cursor on the display
will reappear, indicating that the instrument is no longer in
Recall
mode.
Enable/Disable Key Sound
The instrument initially has key sound enabled from factory. To disable or re-enable the key
sound, follow the steps below:
1.
From the
SYSTEM
menu, browse and select
Buzzer
and press
.
2.
Select between the two options:
On(Def)
–
Enable key sound
Off
–
Disable key sound
3.
Select the desired option and press
to save the change.
4.
To exit the menu at any time, press
twice.
Remote Interface Setup
There are several interfaces available for remote communication: USBTMC, GPIB(non-B
MODELS ONLY), RS-232, Ethernet and RS-485 (for Master/Slave). This section will describe how
to setup all the supported interfaces.
Note:
The
RMT
indicator will appear on display when the power supply is successfully
connected to a PC remotely through any remote interface. Keys on the front panel will be
