FC1400 User Manual
FC1400OM-2.04 26 / 95
FC1400 Operation Manual
Operating procedure
-
Turn on power to the equipment. Power will be turned on if the power switch on the front side of
the main body is pressed for two seconds when power has been turned off; on the other hand,
power will be turned off if the power switch is pressed for two seconds when power has been
turned on.
-
Put some ultrasound gel on US probe, find heart beat of fetus and fix it around the abdomen of
pregnant woman using a fixing belt.
-
Fix TOCO probe on Fundus which is located 10 cm above the belly button of the maternal
abdomen using a fixing belt.
-
Determine a use mode and use the equipment accordingly.
How to store and manage the equipment after use
-
Turn off the power switch and unplug the power cord.
-
When the operation has been completed, clean the equipment and accessories to prevent
malfunction.
Cautions in use
Installation and storage
-
Please avoid moisture, high temperature, dust in the air, salt, and sulfuric materials including
places that are not well-ventilated and direct sunlight.
-
Please avoid vibrations or mechanical impacts.
-
Please avoid places where chemicals are stored or gases are generated.
-
The equipment should operate at the indicated voltage and frequency.
Before operation
-
The equipment should be properly grounded.
-
Please connect all cords accurately and safely.
-
When using an optional battery, please charge it for at least four hours.
-
Any area directly connected to the patient should be double-checked.
-
Please use the equipment within the range of operating temperatures.
During operation
-
The patient should not come into contact with any metal areas of the equipment such as sash or
case. The operator should not touch the patient and the equipment simultaneously.
-
If any abnormality has been found, turn off power and unplug the power cord.
-
Do not use any sharp or pointed object when pressing the LCD or any touch key.
-
Do not confuse demo data with patient data.
